Mobile Outdoor Desert Evaporative Air Cooler Without Water

• Type: Evaporative Air Cooler
• Air Tube Material: Plastics
• Corrosion Durability: Higher
• Operating Voltage: 230 VAC
• Noise Level: Low
• Application Fields: Commercial
• Model NO.: JH168
• Mounting: Floor Standing
• Lifetime: 5~10 years
• Certification: CSA, RoHS, UR, ISO, UL, CE, SGS, CCC, CB
• Condition: New
• Power(W): 380
• Pressure(PA): 80
• Speed: 3
• Airflow(CMH): 8000
• Dimension (mm): 800*480*1380
• Fan Type: Axial
• Control Type: LED+Remote
• Packing: Carton
• Gross Weight(Kg): 34
• Cover Area(M2): 50-70m2
• Transport Package: 1PC /CTN
• Specification: CE ISO
• Trademark: JHCOOL
• Origin: China
• HS Code: 84796000
• Production Capacity: 5000PCS /Month

Product Description

Product introduction

Evaporative air cooler goes wherever it's needed to bring instant cooling to areas up to 80 square Meter. As the largest and most powerful model in the JHCOOL evaporative air cooler line, this heavy-duty unit draws air from outside and uses a powerful blower to push it through 3 cooling pad, rigid cooling pads located on 3 different sides of the cooler. As it cools your air, the Evaporative air cooler also filters out airborne particles and increases employee productivity, all by using up to 80% less energy than an air conditioner. Constructed of UV-protected ABS plastic, the Evaporative air cooler  is designed for durability and will not corrode or crack. To operate the Evaporative air cooler , add water to the large, 57L water tank or connect the unit directly to a garden hose, spigot or direct water line. Evaporative air cooler Additional features include a powerful 380 watt motor, automatic air louvers and 8000 CMH of cooling.


Advantage

The advantages of  JH potable evaporative air cooler 

*3 sides cooling pad, better cooling efficiency.

*Bigger airflow, higher pressure, good for outdoor and commercial area use.

*High-Mid-Low 3 speeds, more choices.

*Ionizer helps to dedust and anti-bacteria, keep fresh air.

*LED control panel with remote control, convenient and intelligent.

*The modified PP of casing material is more adaptive for outdoor use, and more durable.

*High quality & whole sealed casing motor, good heat dissipation, high IP class & waterproof.

*Open type water distributor makes the water flow evenly.

*Fashion and elegant design with big air grill, white and red-brown color for your choice.

 

Feature
8000cmh big airflow, Powerful Axial fan, 57L big water tank, Nice designed plastic body, Temperature display, Healthy negative ionizer, Highest efficiency natural cooling by water evaporation, High efficiency 3pcs cellulous cooling pad, 120 degree left to right auto swing.
8000cmh big airflow
Powerful Axial fan
3 sides cooling pads
57L big water tank
Nice designed plastic body
Temperature LED display
Healthy negative ionizer


Company Information
Jinghui Technology Factory
Fujian Jinghui Technology Co., Ltd specializes in R&D, manufacturing and marketing air cooling systems. After several years of rapid growth, JHCOOL becomes the leading suppler of quality evaporative cooling products to residential, commercial and industrial customers worldwide. For five consecutive years, it achieved the biggest sales volume of inverter type evaporative air cooler in the world. We are success in both domestic and overseas. In China we establish approximately 30 sales and service offices, in addition we expend our market all over the world, such as Oceania, North America, Middle East, Europe, Africa and Southeast Asia.
The company marketing and administration departments are in the downtown of Fuzhou city. The office takes a whole 5th floor of 4# building in Peninsula International. About 50 people work in this 600 squre meter office.

Technical specification

Electric Fan	Power	380w
	Speed	3
	Phase	1
Fan	Single unit cover area	50-70 sqm
	Airflow (M3/H)	8000
	Fan type	Axial
	Pressure	80Pa
	Noise	57db
Cabinet	Cabinet	plastic
	Discharge type	side
	Dimension (mm)	800*480*1380
	Packed size(assembled)mm	810*500*1300
	Loading quantity (assembled) in 40HQ	132pcs
	Water Tank	57L
	Water Consumption	3-8L/H
	Net weight	35kg
	Gross weight	38kg
Control	Control type	LED
	Remote	yes
	Control Type	LED
	Over load protection	Yes
	Pump Protection	Yes
	Temperature display	Yes
	Ionizer	Yes
	Water inlet	Manual & Auto

RFQ
Q: Are evaporative air cooler more suitable for specific climates ?
evaporative air cooler is especially well suited where the air is hot and humidity is low. However, in higher humidity areas there are many proven cost effective uses for evaporative cooling that make it the right choice, like industrial plants, commercial kitchens, laundries, dry cleaners, greenhouses, spot cooling etc.

Q: What advantages does evaporative air cooler have compared to refrigerated cooling systems ?

Evaporative cooling will provide substantial energy saving over refrigerated air units. The simplicity of the design allows low maintenance requirements. The evaporative air cooler will provide fresh, filtered air. The outside air that has been cooled will blow the stale inside air out.

Q: How often do I clean my pads ?
Pads should be cleaned at least once a season prior to storing for the winter. In hard water areas, cleaning may be required more frequently. Periodic, visual examination is required. Remove the back or top of the cooler following the instructions in the operating manual. Look at the pads, if they show signs of heavy mineral deposits they will need to be cleaned.

Q: How do I clean my pads ?

Remove the pad from the unit or back panel. Rinse the pad with fresh water using a hose or soaking the pad in a tub until the mineral deposits disappear. You may want to change the tub water occasionally to accelerate the cleaning process. Allow the pad to sun dry. Reattach the pad to the cooler back panel or reinstall inside the cooler.

Q: How often should the pads be replaced ?

Pads should be changed when they no longer cool as effectively as they did when new. This generally happens when mineral deposits on the pads become so heavy that the water running over them during operation cannot be absorbed. If a pad is properly cleaned and maintained, its life can be three to five years or more. But, we advise customer replace the pad every 2 or 3 years to keep the best cooling efficiency.

Q: How much water do I put in ?

The amount of water required will vary depending on the size of the unit you own. To help determine the correct level, each evaporative air cooler or other portable air cooler is equipped with a water level indicator. It can be found on bottom sump of the unit. Add water until the indicator shoes that the water reservoir is filled. Water will leak from the unit if it is overfilled.

Q: At start-up, the air has a slight odor ?

Occasionally an evaporative air cooler may give off a slight odor when first put into use. To eliminate this odor, run the unit for an hour, drain all the water from the tank and add fresh water. If odor persists repeat the above procedure until it is eliminated.

Q: How often do I have to fill the mobile unit ?

The length of time will vary depending on the dryness of the air and the speed at which the cooler is running. Typically water supplied should last from for one day, or half day, because we design the tank for 8 hours use or 4 hours consumption.

Q: Can the pump run dry ?

The unit can be safely run without water in the tank. It will cause no harm to the cooler or the water pump. Never choose cooler with submersible pump that usually used in glass fish bowl. It will burn while lack of water and cause danger.

If you want to know more information about our products here welcome you in any time

Contact person: Joy Ni

Mobile:[phone]

 

Fax:[phone]